If the filter element is used improperly or an improper filter element is selected, flattening will occur during the operation of the filter element. How can it be avoided? We have summarized some aspects of the above reasons that may occur:

1. The filter element is blocked and not replaced in time. The filter element was severely blocked by pollutants during work and was not cleaned in time, resulting in an increase in the pressure difference of the filter element, and the insufficient strength of the filter element, which caused the filter element to flatten.

2. Inappropriate filter element selection, the filter element selection is not suitable for the current working environment, the filter element accuracy is selected too high, or the pressure exceeds its allowable working pressure. It will also cause the phenomenon of filter element flattening. Many customers think that using stainless steel sintered mesh filter elements and sintered felt filter elements will avoid this situation, but this is not the case. Although these two types of stainless steel filter elements have a certain degree of pressure resistance, they exceed their own pressure resistance. , There will be flattening phenomenon, we must make appropriate adjustments according to the working pressure, such as adding a skeleton, so that the effect will be better

3. Improper installation, the installation of the filter element should be accurate and stable, and the filter has been started before the filter element is fixed, which will damage the filter element.